Kitchen fire safety
Install and test a stand-alone fire detector
Install a suitable detector as directed and press its test button monthly to check the battery.
Why it matters
Early warning provides time to escape before smoke and heat block the route.
Wrong action
Unsafe: Removing its battery, covering it, or never testing it.
Correct action
Install a suitable detector as directed and press its test button monthly to check the battery.
What to do
- Check ignition sources, detectors, and the escape direction first.
- Install a suitable detector as directed and press its test button monthly to check the battery.
- Record a monthly test and replace the battery or unit as instructed for a low-battery warning or failure. Afterward, recheck for any flame, heat, or obstruction.
If something happens
On discovering fire, leave, close the door, and call 999; never re-enter to save property.
Sources and review
- Hong Kong Fire Services Department — Promotion of Wider Use of Stand-alone Fire Detectors
Source checked: 2026-08-20
This page provides general home-safety information and does not replace medical, legal, electrical, or other professional advice.
Related safety lessons
Critical safety ruleKitchen fire safety
Keep the fire escape route clear
Keep the route from the flat door through the corridor to the stairs free of shoes, boxes, bicycles, and rubbish.
View safety lesson →
Critical safety ruleKitchen fire safety
Never leave a lit candle unattended
Use a stable non-combustible holder, keep it away from curtains, beds, and paper, and extinguish it before leaving.
View safety lesson →