Appliance care
How to Clean a Tumble-dryer Lint Filter and Accessible Surfaces
A practical sequence from “Stop and unplug” to “Refit and check”
Overview
Cleaning the user-removable lint filter as the model directs helps maintain airflow. Stop, unplug and cool the dryer first. Clean only accessible parts; never open the rear panel, duct or electrics.
Tools needed
- Maker instructions
- Soft brush
- Dry cloth
- Lint bag
Cleaning steps
Step 1
Stop and unplug
Wait until the dryer has stopped and cooled.
Step 2
Remove the filter
Lift it in the model’s direction without forcing it.
Step 3
Remove lint
Collect surface lint; wash only if the maker permits.
Step 4
Refit and check
Refit fully dry in the right direction and keep vents clear.
Common mistakes
✕ Avoid
Removing the filter while running
✓ Correct actionStop, unplug and cool first.
✕ Avoid
Running with a wet filter
✓ Correct actionRefit only when fully dry.
✕ Avoid
Pushing a sharp tool inside
✓ Correct actionClean only maker-approved accessible areas.
✕ Avoid
Ignoring heavy lint or burning smell
✓ Correct actionStop and arrange inspection.
Practical tips
Tips for helpers
- Confirm the filter location and whether it is washable before each task.
- Bag lint and keep surrounding air openings clear.
Tips for employers
- Provide the model manual and arrange scheduled qualified inspection.
- Never ask the helper to repair heat, duct or electrical faults.
Completion checklist
Checked 0 / 4
