Step 1
Isolate power
Switch off and unplug, or disconnect a cordless model from its charger, avoiding the trigger.
HW035 · Everyday appliance care
How to Clean a Vacuum Bin and Filter
Identify washable and non-washable parts before following model instructions
Overview
Vacuum bin, cyclone and filter care varies by model. Switch off, unplug or disconnect from the charger first. Clean only resident-removable parts and identify each filter as washable, dry-clean-only or replaceable; never wet a filter without permission.
Tools needed
- Model manual
- Rubbish bag or lidded bin
- Clean soft brush
- Water only for approved washable parts
- Dry soft cloth and towel
Cleaning steps
Step 2
Empty the bin as directed
Remove and empty the bin over a rubbish container without releasing dust toward the face.
Step 3
Clean approved bin parts
Use a soft brush or dry cloth. Wash the bin only if allowed; never rinse the cyclone or motor unless expressly stated.
Step 4
Identify every filter
Use its location and manual to classify each filter as washable, dry-clean-only or replaceable.
Step 5
Use the specified method
Wash only approved filters as directed. Do not wet or damage a non-washable filter; clean or replace it as instructed.
Step 6
Dry fully and refit
Air-dry every approved washable part completely, then refit the bin and filters in the correct positions before power.
4 common mistakes
✕ Avoid
Removing the bin with power connected
✓ Correct actionSwitch off and unplug or disconnect the charger first.
✕ Avoid
Washing every filter
✓ Correct actionConfirm the washability of each filter in the model manual.
✕ Avoid
Using detergent, heated drying or an oven
✓ Correct actionUse only the specified method and air-dry completely.
✕ Avoid
Refitting damp bin or filter parts
✓ Correct actionWait until every washable part is fully dry.
Safety notes
- Isolate power and avoid the trigger; keep plug, charger and motor areas dry.
- Never assume a filter is washable, and never rinse a cyclone, motor or unapproved part.
- Stop and report a cracked bin, torn filter, cord damage, burning smell or abnormal noise.
Tips for helpers
- Hold the bin opening low over the rubbish to reduce airborne dust.
- Remove one filter at a time to avoid mixing positions.
Tips for employers
- Provide the correct manual and replacement-filter details.
- Plan suitable protection if the bin contains heavy fine dust or a resident is sensitive.
Completion checklist
Share this guide
Choose the reader's language
